The [Configure...] button allows you to setup and configure options and cut marks for your cutters.

 

To configure cut marks:

1. Select the cutter you want to modify and click the checkbox.

2. Click [Configure...] button (Figure 2).
3. In the "Configure" dialog, select the options you want to use for your cutter and cut marks.

NOTE: Not all cutters have the same options

You can create custom mark variations for the same cutter. Highlight a cutter and click the [Duplicate] button. This opens the Configure Cut Marks dialog, with “Copy” appended to the cutter name (Figure 3). Enter a new name if desired, and select the settings you want for this variation of the cutter, and click [OK]. The duplicated cutter will be listed in Cutter Manager and will show up in the [Contour Cutter Selection] list with the new name that was entered (Figure 4).

 

NOTE: Accessing [Manage Cutters] interrupts all processing and printing.

A list is displayed of all the cutters supported by ONYX. You can click [Select All] button to activate all cutters, or individually select a cutter to activate it.

In the list of supported cutters you can deactivate them by clicking [Clear All] button. This will deselect all cutters, or you can deselect clicking them individually.